EMCO Hyperturn 110 – buy in Moscow, low prices
EMCO Hyperturn 110
all

Technical parameters

all
  • Functional features

    Range over bed 720 mm
    Distance between spindles 1700/2300 mm
    Maximum swing over bed 710 mm
    Maximum rod diameter 125 mm
  • Travel

    X1-axis travel 550/340 (with axis B / with a revolver) mm
    X2-axis travel 300 mm
    Z1-axis travel 1300/1900 (1340/1940) with the B axis (with a turret) mm
    Z2-axis travel 1340/1940 mm
    Y-axis travel 240 (+120/-120) mm
    Counterspindle travel 1360/1900 mm
  • Main spindle

    RPM 200-2500 RPM
    Drive power 100/40% duty cycle 37/52 kW
    Torque 1770/2480 Nm
    Spindle noze (cone) A2 - 11”
    Spindle bearing diameter 190 mm
    Spindle bore diameter 170 mm
    Maximum chuck diameter 500 (630) mm
  • Counterspindle

    RPM 385-2500 RPM
    Drive power 100/40% duty cycle 28/42 kW
    Torque 690/1040 Nm
    Spindle noze (cone) A2 – 11”
    Spindle bearing diameter 190 mm
    Spindle bore diameter 170 mm
    Maximum chuck diameter 500 (630) mm
  • C-axis

    Resolution 0,001 deg.
    RPM 1000 RPM
    Spindle indexing (plate brake) 15 (internal engine 1: 200) deg.
  • Turrets (radial)

    Number of tool stations (magazine capacity) 12 (driving) pcs.
    Tool shank VDI 40
    Tool size 25x25 mm
    Tool diameter 40 mm
    Indexing time (tool change) 0,16 sec.
  • Live tool

    RPM 0-3000 RPM
    Torque 27/40 Nm
    Power rating 5,8/10,5 kW
  • Milling spindle B-axis

    Tool shank CaptoC5
    Number of tool stations (magazine capacity) 40
    Power rating 17/21.5 (16,8/22) kW
    Torque 100/128 (100/130) Nm
    RPM 0-7000 RPM
    Angle of rotation, В-axis 210 deg.
    В-axis resolution 0,001 deg.
    Max. tool diameter 90/125 mm
    Max. tool length 300 mm
    Max. tool weight 8 kg
    Max. coolant pressure over spindle 80 bar
  • Feed drives

    Rapid travels X/Y/Z 30/30/15 m/min
    Feed force X/Y/Z 16400/16400/16400 N
    Positioning accuracy X/Y/Z 3/3/3 μm
  • Power supply

    Voltage 3/PE 400 W
    Maximum voltage fluctuations +5/-10 %
    Mains frequency 50/60 kHz
    Admissible temperature 86 °C
    Power rating +10 to +35 kW
  • Dimensions / weight

    Overall machine height 2900 mm
    Length х Width 7600/8600х2700 with chip conveyor and magazine mm
    Total machine weight 16500 kg
    Spindle axis height over floor 1314 mm

EMCO Hyperturn 110

It deserves your special attention, representing a new generation of multi-purpose machine tools of the highest level of manufacturing capacity and flexibility.

Just an overview of its specifications:

There are two spindle versions — А2-11 и А2-8. Both versions feature reliable and vibration-resistant bearings. The speed range is rather wide — up to 3500 min-1 (for А2-8), high torque — 2480 Nm (А2-11).

Swing arm Sinumerik control unit, with USB interface on the operator panel, with diagnostics from EMCO. The keyboard arrangement is clear, a bigger display and a PC keyboard are available as options.

Hyperturn 110 also features a built-in tool magazine with 40-80 tool stations, easily accessible for manual loading and checks.

The working assemblies of the machine tool are completely protected, thereby, there is a large machining area with upper loading facility, a chips conveyor and coolant pumps.

Where can one buy a CNC machine tool Hyperturn 110? It is very easy — just call an official representative of the manufacturer, EMCO Company. In Moscow, it is JSC “Diomash”, available per telephones: +7(495)646-17-44, 510-55-08.

Order with free shipping


Материалы