EMCO MAXXTURN 65 – buy in Moscow, low prices
EMCO MAXXTURN 65
all

Technical parameters

all
  • Functional features

    Range over bed ø610 mm
    Distance between spindles 830 mm
    Range over saddle ø360 mm
    Distance between centres 682 mm
    Maximum swing over bed ø500 mm
    Maximum machining length 550 mm
    Maximum rod diameter ø65 (76,2) mm
  • Travel

    X-axis travel 260 mm
    Z-axis travel 610 mm
    Z2-axis travel 580 mm
    Y-axis travel +/- 40 mm
  • Main spindle

    RPM 0-5000 (4000) RPM
    Drive power 100/40% duty cycle 21/29 kW
    Torque 250 Nm
    Spindle noze (cone) KK 6
    Spindle bearing diameter ø105 (130/110) mm
    Spindle bore diameter ø73 (86) mm
  • Counterspindle

    RPM 0-7000 RPM
    Drive power 100/40% duty cycle 17/22 kW
    Torque 20 Nm
    Spindle noze (cone) KK 6
    Spindle bearing diameter ø85 mm
  • C-axis

    Resolution 0,001 deg.
    RPM 1000 Si/100 Fa RPM
  • Turret

    Number of tool stations (magazine capacity) 12
    Tool shank VDI30 (VDI40)
    Tool size 20x20 (25x25) mm
    Indexing time (tool change) 0,14 sec.
  • Live tool

    RPM 5000 (4500) RPM
    Torque 25 Nm
    Power rating 6,7 kW
    Number of tool stations (magazine capacity) 12
  • Feed

    Rapid travel along X-axis 24 m/min
    Rapid travel along Z-axis 30 m/min
    Feed force along X-axis 5000 N
    Feed force along Z-axis 7000 N
    Positioning accuracy by axes 3,5/4/3,5 μm
    Rapid travel along Y-axis 12 m/min
    Feed force along Y-axis 7000 N
  • Automatic tailstock

    Quill cone MT 4
    Quill force 8000 N
    Travel 500 mm
    Travel rate about 20 m/min
  • Cooling system

    Tank capacity 230 L
    Power rating 0,57/(2,2) kW
    Delivery (flow rate) 15/65 L/min
  • Parts catcher

    Maximum length of finished part 175 mm
    Maximum diameter of finished part ø65(76,2) mm
    Maximum weight of finished part 4,5 kg
  • Power supply

    Voltage 400 ~ 3/PE W
    Maximum voltage fluctuations +/-10 %
    Mains frequency 50/60 kHz
    Power rating 38 kW
  • Dimensions / weight

    Overall machine height 2050 mm
    Length х Width 3320×2070 mm
    Total machine weight about 5700 kg
    Spindle axis height over floor 1150 mm
  • A2-8 Main spindle (integrated motor spindle)

  • C -axis of A2-8 spindle

  • A2-11 Main spindle (ZF gear 1:1 / 1:4)

    RPM 32 RPM
    Drive power 100/40% duty cycle 12 kW
    Torque 6578 Nm
    Spindle noze (cone) 11
  • C -axis of A2-11 spindle

    Resolution 11 deg.
    RPM 11 RPM
  • Feed drives

EMCO MAXXTURN 65

Considerable savings with still higher efficiency — this definition is best applicable to this equipment for would-be customers. The CNC Lathe maxxturn 65 is a turning centre for machining of single loose workpieces, as well as for bar machining.
Maxxturn 65: Specifications Special attention should be paid to the CNC system (Fanuc or Sinumerik) which can be ergonomically swung by 90 degrees, with process visualization by means of a 10” colour TFT display. The display also features Ethernet and USB interfaces

Maxxturn MT 65 features high-performance CNC-controlled hydraulics. The chips are removed efficiently. The compact design does not require excessive installation space.

It should be underlined that the last version of EMCO Maxxturn 65 features improved design with a new CNC system by Siemens, with rapid traverse feed rate increased more than by 25%. The indexing time of the turret is optimized for reduced preparation and cycle time, increased machining performance.

Will a Maxxturn 65 EMCO suit your demands? Which exact configuration do you need? What are the delivery terms? These and many other questions will be eagerly answered by the employees of “Diomash”, the official sales partner of EMCO GMBH, please, call: 7(495) 646-17-44, 510-55-08.

Order with free shipping


Материалы